| |
MobileScan3D |
|
| |
What is it and how does it work?
MobileScan3D is a truly mobile CNC laser
scanning solution allowing fully automatic reverse
engineering and part inspection verification to occur.
Its portability and rapid setup provides a unique
opportunity to scan on location without the tedious and
time consuming effort required by the current portable
arm scanning solutions.
MobileScan3D from Wenzel ScanTec
represents a productivity breakthrough for the reverse
engineering sector. In addition, since the system offers
full CNC automatic scanning, the accuracy of the
acquired dataset is significantly enhanced over the same
data acquired using portable arm systems and provides
automatically structured and ordered data minimizing
subsequent data “cleanup” and processing time.
|
|
| |
The Mobile CNC Measurement and 3D
Scanning System MobileScan3D comprises of a 2 axis CNC
swivel head providing B and C rotational axes; the
scanning sensor is mounted to the swivel head using a
“quick-change” adaptor minimizing changeover times
between the three available sensors. Sensor variants
have a measuring range of 100, 400 and 1000mm and a
respective average laser line length of 43, 185 and
270mm. Scanning accuracy down to 10 microns can be
achieved with the system.
|
|
| |
The density of scanned lines can be
controlled by programming the velocity of the B and C
axes of the swivel head. Integral thermal sensors, with
environmental control, ensure scanned data-set accuracy;
the sensor body is manufactured from carbon fibre
eliminating any thermal growth due to heat generated
from the laser source. The sensor outer-casing is
independently mounted allowing isolation from the sensor
optics and electronics eliminating the potential for
calibration errors caused by rough system handling
during transit.
|
|
| |
 |
 |
 |
|
100mm sensor for
accurate scanning and measurement
|
400mm and 1000mm sensor for
large depth of field applications
|
Light weight mobile and
portable tripod for fast setup and scanning
|
|
|
The sensors are interchangeable and can
be switched in a few minutes without the need to
recalibrate the system.
The sensor ranges are 100mm, 400mm and
1000mm, with respective accuracies of +/- 0.01mm, +/-
0.05mm and +/- 0.15mm.
|
| |
 |
 |
The addition of a rotary table
(optional), provides 3 axis of CNC motion and
enhances the system for fast
part scanning. Just define your scan path and
then let the CNC rotary table rotate by angular
increment; this dramatically decreases the
scanning time for a large array of parts.
|
|
| |
|
| |
For more information on
this product please visit our contact page. |
|
